Rode Microphones NT2-A Studio Condenser Microphone Bundle

Thumbnail 1 Thumbnail 2 Thumbnail 3 Thumbnail 4

  • Giá nhà sản xuất13.790.000 VNĐ
  • Giá Doremi Shop10.250.000 VNĐ
  • Còn hàng (Available)

Thông tin sản phẩm

Rode NT2-A là một micro condenser chuyên nghiệp cho phòng thu với chất lượng âm thanh rõ nét, chân thực và Là một trong những chiếc micro condenser đa dụng nhất hiện nay. Được sản xuất chính hãng tại Úc.

Rode NT2-A có 3 ưu điểm sau:

Điều chỉnh búp hướng thu âm ( pick-up pattern ):

Cardioid ( hướng trái tim ): Ở chế độ này NT2-A chỉ tập thu những âm thanh đến từ phía trước micro và bỏ qua những sóng âm đến từ phía sau cũng như hai bên. Chế độ này thường dùng để thu âm solo và giảm ồn Feedback cực tốt.

Figure 8 ( hình số 8 ): ở chế độ này NT2-A tập trung thu những âm trước và sau micro. Phù hợp trong ứng dụng phỏng vấn, đàm thoại.

Omni-directional ( thu đa hướng ): thu âm đa hướng từ mọi phía, phù hợp thu âm nhiều ca sỹ, nhóm nhạc,..

Điều chỉnh về độ nhạy: Bạn có thể điều chỉnh độ nhạy theo 3 mức 0dB ( độ nhạy cao ), -5dB ( độ nhạy vừa ), -10dB ( độ nhạy thấp )

Điều chỉnh về âm bass: Khả năng nén âm pass với bộ lọc thông cao ở 3 mức tần số 0Hz, 40Hz và 80Hz.

 

Thông số kỹ thuật

The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.

The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

The RØDE NT2-A microphone is designed and made in Australia.

Spec:

Acoustic Principle:   Pressure Gradient

Active Electronics:   JFET impedance converter with bipolar output buffer

Capsule:   1“ ( 25.4mm )

Polar Pattern:   Cardioid, Omni, Figure-8

Address Type:   Side

Frequency Range:   20Hz - 20kHz

Output Impedance:   200Ω

Maximum SPL:   147dB

Maximum Output Level:   16.0mV ( @ 1kHz, 1% THD into 1KΩ load )

Sensitivity:  -36.0dB re 1 Volt/Pascal ( 16.00mV @ 94 dB SPL ) +/- 2 dB @ 1kHz

Equivalent Noise Level ( A-weighted ):   7dBA

Power Options:   +24V phantom power / +48V phantom power

Output:  XLR Output

Dimensions / weight:   209 x 55 x 55mm / 860g

Made in Australia

 

Content